Nitrox GS3/GS6/GS12/GS40 (U)

Printhead Manufacturer

Xaar

Printhead Family

Nitrox GS3/GS6/GS12/GS40 (U)

Overview

The HIB-XR-1003 Head Interface Board allows communications between the Xaar Nitrox range of printheads and the GIS Printhead Card Manager (PHCM-C2/PHCM-C8-3).

Updated software and logic drives the Nitrox printheads up to their maximum speeds.  Using the AcuChp information stored within each Nitrox printhead means that head setup is fast and simple.

Printhead Variants Supported

Nitrox Core, Pro and Elite each at GS3, GS6, GS12 or GS40

Number of Printheads

1

Print Modes

Binary
Greyscale
Number of Grey levels	16

Performance

• Individual drive voltage control for all 16 printhead ASICs (1/16V steps)
• Grey level / binary mode
• Grey level drop-count control and palette remap
• Printhead waveform selection
• Supports Xaar’s High Laydown mode
• Utilises Xaar AcuChp information
• Drives up to 48kHz

Dimensions

Length	98mm
Width	100mm
Depth	15mm
Weight	90g
PC to PHCM Connection Length	up to 5m
PHCM to HIB Connection Length	up to 10m
HIB to Printhead Connection Length	300mm

Connectivity

Power Supply
Number of Connectors Required to Drive Printhead	2